--	HWg-WLD MIB 1.01
--		History:
--
--		1.00	 27.11.2009 Marek Hummel  - Created
--		1.01	 2.8.2010   Marek Hummel  - Mib validation, add wldValue 
--

HWg-WLD-MIB DEFINITIONS ::= BEGIN
IMPORTS
	OBJECT-TYPE				FROM RFC-1212
	Gauge, enterprises		FROM RFC1155-SMI
	DisplayString, sysName	FROM RFC1213-MIB
	TRAP-TYPE				FROM RFC-1215;


--
-- Type Definitions
--
PositiveInteger ::= INTEGER (1..2147483647)	-- 0x7FFF FFFF


SensorState ::= INTEGER {
		invalid (0),
		normal (1),
		alarm (3)
	}

SensorValue ::= INTEGER {
		normal (0),
		flooded (1),
		disconnect (2),
		invalid (3)
	}

SensorSN ::= DisplayString (SIZE (0..16))
SensorName ::= DisplayString (SIZE (0..16))
SensorID ::= INTEGER

--
-- Node Definitions
--

hwgroup		OBJECT IDENTIFIER ::= { enterprises 21796 }
x390		OBJECT IDENTIFIER ::= { hwgroup 4 }
hwgwld		OBJECT IDENTIFIER ::= { x390 5 }

-- Application Info ------------------------------------------------------------

info		OBJECT IDENTIFIER ::= { hwgwld 70 }

infoAddressMAC OBJECT-TYPE
	SYNTAX	DisplayString (SIZE (0..17))
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"MAC address in text form.
		It is here to distinguish devices in trap messages."
	::= { info 1 }

-- Sensors ---------------------------------------------------------------------

sensTable OBJECT-TYPE
	SYNTAX	SEQUENCE OF WldEntry
	ACCESS	not-accessible
	STATUS	mandatory
	DESCRIPTION
		"A list of sensor table entries. The number
		of entries corresponds with number of detected sensors."
	::= { hwgwld 4 }

wldEntry OBJECT-TYPE
	SYNTAX	WldEntry
	ACCESS	not-accessible
	STATUS	mandatory
	DESCRIPTION
		"An entry containing information applicable to a
		particular sensor."
	INDEX { wldIndex }
	::= { sensTable 1 }

WldEntry ::= SEQUENCE {
	wldIndex	PositiveInteger,
	wldName		SensorName,
	wldState	SensorState,
	wldSN		SensorSN,
	wldID		SensorID,
	wldValue	SensorValue
}

wldIndex OBJECT-TYPE
	SYNTAX	PositiveInteger
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The sensor index."
	::= { wldEntry 1 }

wldName OBJECT-TYPE
	SYNTAX	SensorName
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The sensor name."
	::= { wldEntry 2 }

wldState OBJECT-TYPE
	SYNTAX	SensorState
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The sensor state."
	::= { wldEntry 3 }

wldSN OBJECT-TYPE
	SYNTAX	SensorSN
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The sensor Serial number."
	::= { wldEntry 4 }

wldID OBJECT-TYPE
	SYNTAX	SensorID
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The sensor ID."
	::= { wldEntry 5 }

wldValue OBJECT-TYPE
	SYNTAX	SensorValue
	ACCESS	read-only
	STATUS	mandatory
	DESCRIPTION
		"The sensor value."
	::= { wldEntry 6 }

-- Trap Definitions ------------------------------------------------------------

wldStateToAlarm	TRAP-TYPE
	ENTERPRISE	hwgwld
	VARIABLES	{ sysName, infoAddressMAC, wldIndex, wldName, wldState, wldSN, wldID, wldValue }
	DESCRIPTION
		"Sensor n changed to Alarm state."
	::= 1

wldStateToNormal	TRAP-TYPE
	ENTERPRISE	hwgwld
	VARIABLES	{ sysName, infoAddressMAC, wldIndex, wldName, wldState, wldSN, wldID, wldValue }
	DESCRIPTION
		"Sensor n changed to Normal state."
	::= 2

wldPeriodicAlarm	TRAP-TYPE
	ENTERPRISE	hwgwld
	VARIABLES	{ sysName, infoAddressMAC, wldIndex, wldName, wldState, wldSN, wldID, wldValue }
	DESCRIPTION
		"Sensor n periodic Alarm."
	::= 3

END